Tag Archives: tips

Tips on Painting a Brick Home

Depending on the style of your home, a brick fireplace or wall may detract from your ideal ambience. Painting the brick in your home has been touted as an easy DIY fix, it has its downsides.

Most brick was never intended to be painted. According to the Brick Industry Association, if you paint your exterior brick, you should be repaint it every three to five years.

Brick that’s chipping, deteriorating, molding or in overall poor condition is always a bad candidate for paint. Paint blocks the natural pores in the brick’s surface, which can cause existing problems to become exaggerated over time.

Remember that removing paint from bricks is no easy process. Chemicals have to be used, and often the paint won’t come completely off. If you don’t like the look, you may be stuck with it.

Ask yourself if you’re covering up something that should be addressed separately. Get in touch with the original owners or the builder who installed the brick, whenever possible, to uncover any problems that might arise. You have to be very careful when you’re changing the exterior makeup of a wall.

Moisture is a concern that’s usually apparent right off the bat. Water can enter brick through brick pores, incomplete mortar joints, sills, copings and other gaps. Make sure your brick is completely dry before you paint it– the risk of long-term or immediate damage is less likely.

The natural chemical property of bricks may affect your paint’s durability. According to the Brick Industry Association, most bricks are neutral, but mortar often has a basic alkalinity. Paint products can be affected, so alkaline-resistant primer is usually recommended.

“Efflorescence” is a big word for that annoying white residue that often appears on older brick walls. Remove the efflorescence with water and a stiff brush before painting your brick, and wait to see if it returns.

Most project complications occur when people rush the preparation process. If your brick is brand new, wait at least a year before painting it to allow for drying, weathering and leaching.

Always clean brickwork before painting it, and allow it to dry for at least 24 hours before painting it or applying a water repellant. Don’t use acid cleaning solutions when cleaning your brick– stick to simple water and soap. Acidic solutions can result in paint chipping.

Seal any cracks and repoint (renew the external mortar joints, or pointing) when needed. Get rid of efflorescence, wash off dirt and eliminate mold with weed killer.

Exterior and interior walls should be treated differently, because exterior brick comes into contact with ground elements. The Brick Industry Association also advises using a porous paint for exterior brick walls, so the brick can breathe.

Choosing a high-quality paint is vital for painting brick successfully. Use specific masonry paint products for painting brick, starting out with a conditioner and a primer, and then using a breathable latex exterior or interior paint, like Sherwin-Williams’ SuperPaint Acrylic Latex.

Look into having your brick professionally stained, rather than painted. It can be more expensive, a brick stain penetrates the pores of the brick, unlike paint, which simply sits on the surface. It creates new color without some of the long-term risks that come with paint.

Faux Painting Tips and Ideas

Faux Painting Tips

Faux painting is a very convenient form of painting the interiors of the house which not only is do it yourself type of work but also adds an exceptional look to the entire room. It’s a great way of creating a soothing and pleasant atmosphere around the room. Faux painting can be done with many techniques such as sponging, rag rolling, dragging etc depending upon the type of the surface. Each technique has its own individual specialty and needs that extra tools and materials. Faux painting can be easily learned over the internet from the all the online faux painting schools and one can also have a professional degree by doing a course on faux painting. These schools help the student learn faux painting in the easiest possible way so as to help them do all the future painting in and around the home by themselves.

General materials and tools needed

In order to have a basic project of faux painting one need the normal tools which are required for almost all the techniques. The following is the list of all the materials needed for undergoing a basic faux painting project:
* Paint tray
* Lint free rags
* Rubber gloves
* Painters tape
* Zinsser products such as Blend and glaze etc

. General tips on faux painting

The following is a in general list of tips which would be very helpful in performing a faux painting project in a most simple but sweet way:
* The surface should and must be prepared very properly before starting to decorate it.
* The experimentation should be done first on a sample board rather then directly approaching the wall.
* The work should be divided into small sections. One wall or section should be completed stopping at the corner or the natural break.
* The work should be done very quickly well in time before the glaxe becoming tacky may be around 10 to 15 min. In case of performing negative applications a thick wet edge of unworked glaze should be left at the end of each section to help allow the blending of the next one.
* The use of protective gloves is often recommended while glazing for easy clean up.
* The use of lint free rags such as funnels, diapers, cheesecloth or sheets would be advisable.

When following the above tips very closely, one can get outstanding results from any simple faux painting project.

Faux painting ideas

Faux is a French word for the word ‘false’ or ‘fake’. We can say that this painting is all about false illusion. It creates an illusion of depth and complexities to the painted walls, doors, and ceilings. Till now we have come across popular effects achieved by faux painting in a stone, parchment, and in an antiquarian. Faux finishing provides a variety of interesting techniques that gives depth and personality to walls and other objects. In other words, we can say that it provides life to the non living things. Faux painting can be both simple and a complex one. It provides a purpose to everything whether it is wood, marble or leather. It is less expensive alternative for using natural materials. It is a unique style whether it is done by any individual or a professional. Through layering of paints and glazes done by hand it provides the surface appear to be something it is not. It is the easiest and creative outlet for people who are interested in arts and is a wonderful medium for experimentation.

Implementation

Faux is applied to any kind of surface but it generally involves wall preparation and repair, one or two base layers of paint, one or more coatings of a complementary glaze and paint mix, and a topcoat that acts as sealer and protectant. It is not so that it is only limited to walls, it is also useful for revitalizing furniture or cabinets and adds appeal to walkways or other concrete structures. Faux paintings are applied for bare walls. Before one get out the sponge the wall should be ready and clean so that one can give a background color to it. Light colors are always ideal as a background as they show through the overlying paint to some degree and help in creating a sense of depth or roughness. Experienced painters recommend the background to be painted with semi-gloss or satin paint as most of the faux paints dry slowly on slightly slick backing surface which tends to heighten the desired effect.

Suitability

Faux paining is also suitable for children. Even small children can do this faux painting. This can be done by anyone as it is very easy to do. It can be done by anyone like the housewives, children and older people.

Contractors

You can also easily find a house painting contractor to do faux painting. It will cost more than a regular paint application, but the work will be done a lot more quickly.